Turn this list into pipeline.
Machinery Companies in Sheffield: 224 Active Firms (2026)
Machinery companies in Sheffield design, manufacture, distribute and service industrial equipment for production, handling and processing sites.
Buying decisions usually sit with operations, engineering, maintenance and procurement teams, often with health-and-safety or compliance input where machinery is installed on production sites. Suppliers in this market sell to manufacturers, infrastructure operators, workshops and process-site owners, with engagements that can run from replacement parts and servicing to full equipment supply, installation and commissioning. More complex accounts tend to be mid-market and larger industrial customers that need technical documentation, site attendance, spare-parts availability and post-installation support, rather than a transactional catalogue purchase.
Read more
Sheffield has 224 actively trading machinery companies, a compact local cluster within South Yorkshire's industrial supply chains. The reported employment footprint is 1,593 people, which gives the sector a visible engineering, installation and service base rather than only brokerage or wholesale activity. Commercial scale is uneven: 43 companies report turnover above £5M, while 8 were incorporated since 2022. That mix points to an older base of distributors, fabricators, installers and maintenance specialists, with relatively few newly formed engineering start-ups entering the cohort.
Industrial machinery placed on the Great Britain market sits under the Supply of Machinery (Safety) Regulations, with obligations before equipment is put into service as well as before it is sold. The practical burden falls on design safety, conformity assessment, technical files, English instructions, declarations of conformity or incorporation, and the relevant CE or UKCA marking. HSE treats most new machinery as within scope, while enforcement can sit with HSE or local trading standards depending on field of use. CE marking recognition for many goods remains available in Great Britain alongside UKCA marking where applicable, which matters for importers and distributors managing mixed stock.
The Sheffield cohort appears more mature than newly formed, with buyer relationships tied to installed equipment, after-sales servicing and compliance work. That tends to favour firms with practical engineering depth and field-service capacity over pure sales agents. Margin pressure may persist where customers delay capital equipment purchases, but safety obligations and replacement cycles give maintenance-led suppliers steadier contact with industrial sites. Consolidation could remain selective: acquirers are likely to value specialist installation teams, technical documentation capability and access to repeat service contracts, rather than simple catalogue distribution.
224
Active firms
2026
43
Above £5M turnover
Sheffield machinery firms
8
Incorporated since 2022
Within the Sheffield cohort
Key facts
About 19% of the trading cohort reports turnover above £5M (43 of 224 firms) — the rest sits below that revenue band.
3% of the cohort was incorporated since 2022 (8 firms), so a sizeable share is in its first few filing cycles.
Industrial machinery supplied in Great Britain is principally governed by the Supply of Machinery (Safety) Regulations 2008, which covers requirements before machinery is placed on the GB market or put into service.
Most new machinery must be designed and constructed to be safe, with a technical file, appropriate conformity marking, English instructions and a Declaration of Conformity or Incorporation.
CE marking recognition for many goods has been extended indefinitely in GB, allowing either CE or UKCA markings beyond 31 December 2024 where applicable.
Machinery and equipment accounts for 7.0% of UK manufacturing value added, 6.1% of manufacturing employment and 10.3% of manufacturing exports.
The UK was the 10th largest global exporter of machinery and equipment goods in 2022, with a 2.6% global market share.
Top Sheffield Machinery companies
Wright Brothers Partnership Limited
Trajectory
3y · 2023–NowFinancial sub-scores
Computed from 3 filingsDesigns, manufactures and installs materials handling and industrial processing equipment, including conveyors, silos, hoppers, feeders, steelwork and bespoke machinery. Provides engineering design,…
Serves B2B industrial operators and contractors, including blue-chip firms in quarrying and aggregates, building products, recycling, energy, food, construction, ports and utilities.
Financial Health
StableStable · 0% CAGR over 2y
Location
United Crane Services Limited
Trajectory
3y · 2023–NowFinancial sub-scores
Computed from 3 filingsManufactures and supplies overhead cranes and lifting equipment, including gantries, hoists, slings, chains and clamps. Provides crane installation, maintenance, repairs, 24/7 breakdown support,…
Serves B2B customers including manufacturers, industrial sites and local businesses that use overhead cranes and lifting equipment, with emphasis on Sheffield, Yorkshire and customers across the UK.
Financial Health
DistressedDistressed · -13% CAGR over 2y
Location
Trajectory
3y · 2023–NowFinancial sub-scores
Computed from 3 filingsDesigns and manufactures cranes and industrial lifting and handling equipment, including jib cranes, overhead cranes, gantries and monorail systems. Provides bespoke handling systems, manipulators…
Serves UK businesses across industrial sectors that need lifting, handling and engineering support, including manufacturers, warehouses, production sites and facilities teams responsible for cranes,…
Financial Health
WeakWeak · -5% CAGR over 2y
Location
Professional Lifting Services Limited
Trajectory
5y · 2020–NowFinancial sub-scores
Computed from 5 filingsDesigns, manufactures and installs overhead cranes and industrial lifting equipment, including lifting beams, jib cranes, hooks and grabs. Provides maintenance, inspection, proof load testing,…
Sells to businesses needing industrial lifting equipment, especially crane operators and organisations using overhead cranes. Serves customers across the UK, including the railway industry, with…
Financial Health
HealthyHealthy · Hiring · 7% CAGR over 4y
Location
Trajectory
5y · 2021–NowFinancial sub-scores
Computed from 5 filingsDesigns and manufactures lifting and handling equipment for rail depots and maintenance workshops, including bogie and wheel drops, jacks, shunters, traversers and cranes. Also provides installation,…
Sells to rail maintenance providers, train operators, rolling stock manufacturers, and rail infrastructure/public transport organisations.
Financial Health
WeakWeak · -68% CAGR over 4y
Location
Neilson Hydraulics & Engineering Limited
Trajectory
3y · 2023–NowFinancial sub-scores
Computed from 3 filingsDesigns and manufactures hydraulic power units and bespoke hydraulic systems, and distributes industrial hydraulic components. Provides installation, commissioning, maintenance and repair services,…
Serves B2B customers in agriculture, construction, gas, injection moulding, marine, material handling, mining, offshore, oil, petrochemical, quarrying, rail, recycling, steel and water authority…
Financial Health
HealthyHealthy · 0% CAGR over 2y
Location
ROBSON HANDLING TECHNOLOGY LIMITED
Trajectory
5y · 2021–NowFinancial sub-scores
Computed from 5 filingsDesigns, manufactures, installs and services conveyor-based materials and baggage handling systems. Supplies integrated handling solutions for airports, bulk materials operations, warehouses and…
Serves B2B customers in airport baggage handling, bulk materials handling, warehouse and intralogistics sectors worldwide, including operators requiring integrated handling systems and site support.
Financial Health
DistressedDistressed · -71% CAGR over 4y
Location
Kinetic Solutions
Trajectory
2y · 2020–NowProvides engineering design, manufacturing and support for mechanical handling systems, kinetic architectural structures and hydraulic equipment. Delivers bespoke solutions for high‑risk and…
Serves B2B clients with demanding engineering projects, including high-risk industrial sites, major architectural developments, nuclear operators, entertainment venues, and organisations needing…
Financial Health
Insufficient historyInsufficient history
Location
T.W. WARD C.N.C. MACHINERY MIDLANDS AND SOUTH LIMITED
Trajectory
3y · 2023–NowSupplies CNC machine tools and metalworking equipment including milling machines, lathes, machining centres, turn‑mill systems, and horizontal boring machines. Acts as a distributor for international…
Sells to engineering and manufacturing businesses in the UK and Irish Republic, including aerospace, automotive, defence, medical, oil and gas, rail and nuclear firms needing CNC machining capacity.
Financial Health
Insufficient historyInsufficient history
Location
Blastcom (U.K.) Limited
Trajectory
2y · 2023–NowFinancial sub-scores
Computed from 2 filingsDesigns and manufactures shot blasting, shot peening and dust extraction equipment for surface preparation. Supplies refurbished blast machines, spare parts and abrasives, and provides equipment…
Serves B2B metal processing and industrial manufacturers across aerospace, automotive, marine, offshore oil and gas, foundry, forging, railway, energy, medical and general equipment sectors.
Financial Health
HealthyHealthy · 0% CAGR over 1y
Location
B R G Recycling Machinery Limited
Trajectory
5y · 2018–NowFinancial sub-scores
Computed from 5 filingsManufactures and supplies recycling machinery including vertical and horizontal balers, cardboard balers and waste compactors. Offers standard and bespoke machines for sale or hire, plus…
Serves UK businesses and public sector organisations that handle commercial waste, including retailers, manufacturers, logistics firms, recyclers and NHS sites needing on-site recycling equipment for…
Financial Health
StableStable · Hiring · 2% CAGR over 6y
Location
Straaltechniek U.K. Limited
Trajectory
3y · 2022–NowFinancial sub-scores
Computed from 3 filingsDesigns and manufactures shot blasting and shot peening equipment for metal surface preparation, including wheel and air blasting machines, blast cabinets, blast rooms, and dust extraction systems.…
Serves B2B manufacturers and industrial operators in high-end metal processing, including aerospace, automotive, marine, offshore oil and gas, foundry/forging, railway, energy, medical and…
Financial Health
HealthyHealthy · -4% CAGR over 2y
Location
ROTARY ENGINEERING UK LIMITED
Trajectory
3y · 2023–NowFinancial sub-scores
Computed from 3 filingsDesigns and manufactures equipment for high‑voltage coil manufacturing and electric motor and generator repair, including winding machines, test panels, winding analysers, and industrial…
Serves B2B industrial customers worldwide, including high-voltage coil manufacturers, electric motor and generator repair workshops, traction workshops, and steel, chemical and recycling operations.
Financial Health
StableStable · 0% CAGR over 2y
Location
DESIGN, PROTOTYPE, MANUFACTURE AND SUPPLY LIMITED
Trajectory
5y · 2021–NowFinancial sub-scores
Computed from 5 filingsProvides engineering design, prototyping, machining and fabrication services to develop products from concept to volume production. Designs and manufactures special‑purpose machinery, plant, and rail…
Serves B2B clients in rail, manufacturing, safety, nuclear, leisure and automotive sectors, including organisations needing special-purpose machinery, plant, rail depot or track equipment,…
Financial Health
HealthyHealthy · Hiring · 14% CAGR over 4y
Location
CISDI UK Limited
Trajectory
5y · 2021–NowFinancial sub-scores
Computed from 5 filingsProvides engineering design, consulting and EPC services for the metals industry, including plant layout, raw material handling, iron and steelmaking facilities, continuous casting, rolling mills,…
Serves B2B customers in the global metals and steel industry, including steel producers, iron-making companies, rolling mills and plant operators.
Financial Health
HealthyHealthy · Hiring · 7% CAGR over 4y
Location
EUROPA ENGINEERING LIMITED
Trajectory
5y · 2020–NowFinancial sub-scores
Computed from 5 filingsProvides mechanical handling and fabrication engineering services, including 2D and 3D design, CNC profiling, bending and forming, welding, heavy machining, assembly, testing, installation,…
Serves B2B industrial clients, particularly manufacturers and infrastructure operators needing mechanical handling and fabrication support for production lines, site installations and engineered…
Financial Health
StrongStrong · -1% CAGR over 5y
Location
C.B. KAYMICH & CO. LIMITED
Trajectory
5y · 2021–NowFinancial sub-scores
Computed from 5 filingsDesigns and manufactures adhesive application, flavour application and fluid control systems used in cigarette, filter‑making and packing machinery. Also provides installation, training, maintenance,…
Serves B2B process-industry manufacturers, particularly tobacco companies and cigarette, filter-making and packing operations, with regional representation for international customers.
Financial Health
StableStable · -72% CAGR over 4y
Location
MAYFLOWER ENGINEERING LIMITED
Trajectory
5y · 2021–NowFinancial sub-scores
Computed from 5 filingsProvides bespoke mechanical engineering services including design, analysis, machining, metal forming, welding and fabrication. Manufactures and installs engineered components, handling equipment and…
Serves B2B and public-sector clients in defence, nuclear, rail, civil engineering, construction, oil and gas, subsea, power generation, materials processing, and architectural metalwork.
Financial Health
HealthyHealthy · -69% CAGR over 4y
Location
STREET CRANEXPRESS LIMITED
Trajectory
5y · 2020–NowFinancial sub-scores
Computed from 5 filingsProvides maintenance, servicing, repair and modernisation of overhead cranes. Installs hoists and lifting equipment, offers inspections, breakdown support, upgrades, spare parts supply, and training…
Serves UK businesses and organisations of any size that operate overhead cranes, hoists and lifting equipment, including industrial sites, warehouses, manufacturing facilities and facilities…
Financial Health
StableStable · -60% CAGR over 5y
Location
COOPERMATIC LIMITED
Trajectory
5y · 2022–NowFinancial sub-scores
Computed from 5 filingsDesigns and supplies industrial liquid filtration systems for manufacturing processes, including coolant and grinding filtration. Also provides oil recovery presses, chip handling conveyors,…
Serves industrial manufacturers with machining and grinding operations, including aerospace, aircraft engine, industrial tools, hardware and precision fastener producers, seeking production-line…
Financial Health
DistressedDistressed · -65% CAGR over 4y
Location
ADDITIVE MANUFACTURING TECHNOLOGIES LTD
Trajectory
5y · 2021–NowFinancial sub-scores
Computed from 5 filingsManufactures and distributes post‑processing equipment for additive manufacturing. Produces precision machines used to clean, smooth, dye and finish 3D‑printed parts for industrial production…
Serves businesses producing 3D printed parts, including additive manufacturing service providers and industrial manufacturers needing post-processing equipment.
Financial Health
HealthyHealthy · -56% CAGR over 4y
Location
K Hartwall Limited
Trajectory
3y · 2023–NowFinancial sub-scores
Computed from 3 filingsDesigns and manufactures material handling and intralogistics equipment, including roll containers, foldable cages, dollies, adapter pallets, tugger train systems, and AGV mobile robots used to move…
Serves B2B logistics and operations teams in retail, parcel/postal, e-commerce fulfilment, 3PL and industrial manufacturing sectors, including grocery, DIY, beverage, dairy, automotive and recycling…
Financial Health
HealthyHealthy · Growing · 0% CAGR over 2y
Location
Magnetic Systems Limited
Trajectory
5y · 2021–NowFinancial sub-scores
Computed from 5 filingsSupplies and manufactures magnetic workholding and lifting equipment, including permanent, electromagnetic and electro‑permanent chucks, lifting magnets and controllers. Provides bespoke magnetic…
Sells to B2B industrial customers, especially precision engineering, machining and grinding workshops, manufacturers, and firms needing magnetic workholding or lifting systems, testing, servicing and…
Financial Health
HealthyHealthy · Growing, Hiring · 3% CAGR over 4y
Location
Baldwin & Francis Limited
Trajectory
5y · 2021–NowFinancial sub-scores
Computed from 5 filingsDesigns and manufactures electrical switchgear and power control equipment for industrial and hazardous environments. Provides engineering, installation support, refurbishment and maintenance for…
Serves B2B customers in safety-critical industrial and infrastructure sectors, including rail and tunnelling operators, mining companies, manufacturers, utilities, facilities management providers,…
Financial Health
DistressedDistressed · -64% CAGR over 4y
Location
Wilson Bros (Sheffield) Limited
Trajectory
2y · 2023–NowFinancial sub-scores
Computed from 2 filingsDesigns, manufactures, installs and maintains dust, fume and mist extraction systems for industrial facilities. Also provides sheet metal fabrication and general steelwork, and carries out on-site…
Serves B2B industrial customers in engineering, construction and fabrication, including firms needing dust or fume extraction, general metalwork, site maintenance, and industrial plant or machinery…
Financial Health
DistressedDistressed
Location
SYSTEM & TECHNICAL SOLUTIONS LIMITED
Trajectory
5y · 2021–NowFinancial sub-scores
Computed from 5 filingsProvides control system integration, electrical control panel design and build, and engineering software and site services. Supplies automation and process control systems for rail maintenance,…
Serves B2B industrial and infrastructure clients in petrochemical/process, renewables, rail maintenance, material handling and manufacturing, including project managers and operations teams needing…
Financial Health
StableStable · Hiring · 4% CAGR over 4y
Location
TRACTEL (UK) LIMITED
Trajectory
5y · 2021–NowFinancial sub-scores
Computed from 5 filingsSupplies and services lifting, pulling and load‑handling equipment, fall protection systems, and height access solutions. Products include hoists, clamps, load measurement devices, safety harnesses,…
Serves businesses and public-sector organisations with lifting, material-handling, access and height-safety needs, including industrial operators, construction contractors, facilities maintenance…
Financial Health
StableStable · -70% CAGR over 4y
Location
Nelson (Heat Transfer) Limited
Trajectory
4y · 2022–NowFinancial sub-scores
Computed from 4 filingsManufactures industrial and commercial heat exchangers and provides repair and maintenance services. Also offers non‑destructive testing, high‑integrity jointing techniques, and servicing of heat…
Serves B2B customers operating commercial and industrial plant across the UK, including engineering, maintenance and procurement teams in sectors that use heat exchangers.
Financial Health
WeakWeak · -13% CAGR over 3y
Location
AKS Heat Transfer Limited
Trajectory
5y · 2021–NowFinancial sub-scores
Computed from 5 filingsProvides manufacture, servicing, repair and refurbishment of heat exchangers including shell and tube, plate, and extended surface units, plus charge air coolers, radiators and fin coils, with…
Serves B2B customers in industrial, marine, oil and gas, power generation and food processing sectors, including operators and maintenance teams responsible for heat exchanger equipment.
Financial Health
StableStable · Hiring · 3% CAGR over 4y
Location
TDR Transmission Ltd
Trajectory
5y · 2021–NowFinancial sub-scores
Computed from 5 filingsSupplies and reconditions industrial drives and gearboxes, including fixed reduction and variable speed units. Provides gearbox repair, overhaul and gear cutting services, replacing worn gears and…
Serves B2B industrial customers operating heavy machinery, including manufacturers, processing sites and plant operators needing industrial drives, gearboxes, bearings and related mechanical…
Financial Health
HealthyHealthy · Growing, Hiring · 8% CAGR over 4y
Location
Associated Polymer Services Limited
Trajectory
3y · 2023–NowFinancial sub-scores
Computed from 3 filingsManufactures and supplies products for tunnelling, geotechnical, and underground construction projects, including tube‑à‑manchette pipes, inflatable packers, grouting equipment, hoses, pipework,…
Serves geotechnical, tunnelling, underground construction and marine contractors, including major rail, tunnel, dam and infrastructure project teams, as a B2B supplier to specialist engineering firms.
Financial Health
WeakWeak · -4% CAGR over 2y
Location
Principle One Engineering Limited
Trajectory
3y · 2023–NowFinancial sub-scores
Computed from 3 filingsSupplies precision electromechanical components including ball bearings, motor spindles, custom electric motors, motor inverters, geared motor systems, and rotary encoders. Acts as a distributor for…
Serves UK and Ireland businesses, particularly OEMs and engineering teams building or maintaining high-precision machinery, special machines and harsh-environment equipment in machining, compressor,…
Financial Health
HealthyHealthy · Hiring · 22% CAGR over 2y
Location
Therco - Serck Ltd
Trajectory
3y · 2023–NowFinancial sub-scores
Computed from 3 filingsDesigns and manufactures heat transfer equipment including shell and tube heat exchangers, air‑cooled heat exchangers, and industrial and marine oil, water and air coolers, supplying power…
Serves B2B industrial customers in marine, power generation, petrochemical, and oil and gas sectors, including procurement teams, mechanical engineers, project managers, OEMs, operators, and…
Financial Health
StrongStrong · Growing · 2% CAGR over 2y
Location
Aldercote Limited
Trajectory
3y · 2022–NowFinancial sub-scores
Computed from 3 filingsDesigns and manufactures vehicle-mounted access platforms installed on vans and pickup trucks, including insulated and custom models for working at height. Supplies equipment to sectors such as…
Sells to B2B and public sector buyers in telecoms, utilities, equipment rental, local authorities, street lighting and signage, building maintenance, and security/CCTV sectors needing vehicle-mounted…
Financial Health
StableStable · Hiring · 33% CAGR over 2y
Location
PORTOBELLO RMF ENGINEERING LIMITED
Trajectory
5y · 2021–NowFinancial sub-scores
Computed from 5 filingsDesigns and fabricates process plant equipment including pressure vessels, heat exchangers, subsea equipment, and bespoke high‑integrity metal fabrications. Provides mechanical design, manufacturing,…
Serves B2B process plant operators, engineering contractors and industrial manufacturers needing pressure equipment, with customers in subsea, defence and high-integrity fabrication markets.
Financial Health
StableStable · 2% CAGR over 4y
Location
MFH CONSTRUCTION PROJECTS LIMITED
Trajectory
5y · 2019–NowFinancial sub-scores
Computed from 5 filingsProvides machinery and equipment installation, removal, and relocation services for industrial clients. Supports engineering projects including installation of single machines and complete production…
Serves UK industrial and manufacturing businesses, from firms with single-machine requirements to operators of full production lines, including clients managing plant, machinery and equipment assets.
Financial Health
StrongStrong
Location
TASKERS UK LIMITED
Trajectory
3y · 2023–NowFinancial sub-scores
Computed from 3 filingsDesigns, manufactures, supplies and repairs hydraulic systems, components and equipment. Provides lubrication products including lube sticks, hydraulic power units, cylinders and tools, and offers…
Sells to B2B and industrial buyers needing hydraulic and lubrication equipment and support, particularly aviation and railway organisations such as OEMs, contractors and maintenance teams, with…
Financial Health
StableStable · 0% CAGR over 2y
Location
DIAMOND ENGINEERING GROUP LTD
Trajectory
3y · 2023–NowFinancial sub-scores
Computed from 3 filingsProvides engineering and fabrication services including mechanical design, material processing, welding, machining, assembly and testing. Delivers project management, steel erection and mechanical…
Serves B2B and public-sector buyers in nuclear, rail and transport, renewable energy, heavy construction, oil and gas, subsea, defence, leisure and tourism, and mining sectors needing turnkey…
Financial Health
HealthyHealthy
Location
SATURN MACHINE KNIVES LIMITED
Trajectory
5y · 2021–NowFinancial sub-scores
Computed from 5 filingsManufactures and supplies precision industrial machine knives and blades for recycling, biomass processing, sawmill and forestry equipment. Also provides custom blade production, blade sharpening…
Serves B2B industrial customers worldwide, including recycling centres and processors in rubber/tyre, textile, plastic, metal and WEEE recycling, plus biomass processors, sawmills, arborists and…
Financial Health
WeakWeak · -3% CAGR over 4y
Location
ROYAL TOOL CONTROL LTD
Trajectory
5y · 2021–NowFinancial sub-scores
Computed from 5 filingsManufactures and supplies tool presetting gauges, tool control and management systems for manufacturing and engineering. Provides tool storage equipment, foam tool inserts, lifting and handling…
Serves B2B customers in manufacturing and engineering, including machining operations and tooling, production, maintenance and health-and-safety teams needing controlled tool storage, presetting,…
Financial Health
StableStable · -3% CAGR over 4y
Location
AIR ACCESSORIES (SHEFFIELD) LIMITED
Trajectory
5y · 2021–NowFinancial sub-scores
Computed from 5 filingsSupplies pneumatic and hydraulic components including valves, cylinders, and aluminium extrusion systems. Distributes brands such as Emerson Aventics, ASCO, and Bosch Rexroth, and provides bespoke…
Sells mainly to B2B industrial buyers needing fluid power products, including engineers, maintenance teams and OEMs. Serves manufacturers and other businesses requiring pneumatic and hydraulic…
Financial Health
StableStable · Hiring · 7% CAGR over 4y
Location
BPH ENGINEERING SERVICES LIMITED
Trajectory
3y · 2023–NowFinancial sub-scores
Computed from 3 filingsProvides CNC machining services including milling, turning and manufacture of precision components. Produces closed-die and rotary forge tooling, engineering spares, and offers mechanical repair of…
Serves B2B industrial customers in the steel, forging, spring, wire and mining sectors, including operators of industrial plant, cranes, lifting gear and GFM machines across South Yorkshire, West…
Financial Health
StableStable · -23% CAGR over 2y
Location
Trajectory
5y · 2021–NowFinancial sub-scores
Computed from 5 filingsProvides repair and maintenance services for industrial equipment, including pumps and related machinery. Offers diagnostics, refurbishment and servicing to restore performance and reliability for…
Serves B2B customers needing industrial equipment repair, including companies operating machinery and pumps. Targets industrial operators and maintenance teams seeking repair and servicing support.
Financial Health
StableStable
Location
Crawford Controls Limited
Trajectory
4y · 2020–NowFinancial sub-scores
Computed from 4 filingsDesigns and builds industrial control systems and automation solutions, including custom electrical control panels and PLC software. Provides system design, manufacture, installation, commissioning,…
Serves commercial and industrial project clients, including electrical contractors, building developers, facilities teams, railway depot operators, car park operators, and heating, ventilation and…
Financial Health
DistressedDistressed · -2% CAGR over 5y
Location
Spear & Jackson
Operates a group of industrial businesses that manufacture and supply hand tools, garden tools, magnetic separation equipment, and precision measurement instruments for industrial, trade, and…
Serves a mix of consumer, trade and industrial customers, including tool buyers, engineering businesses and manufacturers needing magnetic technology or precision measurement products.
Location
JACO TOOLING COMPANY LIMITED
Trajectory
4y · 2022–NowFinancial sub-scores
Computed from 4 filingsManufactures machine knives, blades and cutting components for paper, label, tape converting, textile and tobacco industries. Produces items such as top and bottom knives, razor blocks and spacers,…
Serves B2B manufacturers in the paper, label and tape converting, textile, and tobacco industries that need machine knife spares, ancillary parts, sharpening, or precision engineering support in the…
Financial Health
StableStable · -14% CAGR over 3y
Location
Edge Tool Manufacturing Company Limited
Trajectory
3y · 2023–NowFinancial sub-scores
Computed from 3 filingsManufactures industrial machine blades and knives for scrap metal, plastics, paper and card processing equipment. Produces standard and bespoke shear blades, baler blades, granulator blades and…
Serves B2B customers in metal, plastics, paper and card recycling and processing, including scrap processors, recycling operators and OEMs of industrial processing machinery in the UK and…
Financial Health
DistressedDistressed · -23% CAGR over 2y
Location
Cutlery And Allied Trades Research Association
Trajectory
3y · 2023–NowFinancial sub-scores
Computed from 3 filingsProvides testing, research and consultancy for manufacturers of knives, cutlery, cookware, blades and related tools. Designs and manufactures sharpness and durability testing equipment, performs…
Serves manufacturers, retailers and consumers in cutlery, knives, cookware, tools, surgical and dental instruments, razors and saws, plus commercial, industrial and domestic users of knife sharpeners.
Financial Health
HealthyHealthy · -17% CAGR over 2y
Location
Taylor Woolhouse Limited
Trajectory
3y · 2023–NowFinancial sub-scores
Computed from 3 filingsDesigns, manufactures and installs bulk storage, mineral processing and materials handling systems. Supplies silos, batching and blending equipment, crushers and effluent treatment systems, and…
Serves UK industrial businesses in mineral processing, materials handling, bulk storage, batching and blending, and effluent-treatment operations.
Financial Health
StrongStrong
Location
Unlock all 224 leads
Showing 49 of 224 — +175 more with verified decision-maker contacts, live data, and CRM sync.
How Sheffield Machinery companies work and how to sell to them
What they do
Machinery suppliers usually make money from a mix of equipment margin, engineered projects, spares, repair work, installation, commissioning and planned maintenance. Some build or modify equipment; others import, distribute or service machines made elsewhere. Pricing is typically quote-led, with parts sold from catalogues or stock, service charged by visit or contract, and larger jobs scoped around site conditions, safety requirements and delivery lead times. Revenue is rarely just the initial sale. Installed equipment creates recurring demand for consumables, breakdown cover, calibration, training, documentation updates and replacement components, especially where production downtime has a direct cost for the customer.
Who they sell to
Customers are usually production-led organisations: manufacturers, fabricators, utilities contractors, materials-handling operators, repair workshops and process-site owners. Day-to-day influence often sits with engineering managers, maintenance leads, operations directors and site managers, while finance and procurement teams become more involved when an order affects capital budgets or supplier risk. Smaller purchases may move through repeat-account relationships or distributor channels. Larger equipment packages tend to involve technical evaluation, site visits, safety sign-off and formal procurement, with sales cycles measured in weeks or months rather than a simple online checkout.
What they buy
Most Sheffield machinery firms tend to spend on systems and services that help them quote accurately, manage stock, schedule field engineers and keep compliance paperwork under control. Relevant categories include CRM, finance software, stock control, service management, document management, CAD and production planning tools, plus quality, health-and-safety and training support. Firms that import or distribute machinery also need freight, warehousing, insurance, product liability advice and customs support. Those with installation teams may buy vehicles, tools, mobile workforce software, recruitment services and outsourced testing or certification expertise where internal capacity is limited.
Why and how to sell to them
Commercial pressure often shows up in long lead times, cash tied up in parts inventory, skills shortages, margin leakage on bespoke jobs and the cost of unplanned site visits. Machinery buyers tend to evaluate vendors when they add field engineers, win a larger manufacturing account, take on a new imported product line, expand service contracts or face closer scrutiny around CE, UKCA or HSE obligations. Outbound messages usually land better when they refer to downtime, traceability, audit-ready documentation, faster quoting or service profitability, rather than generic productivity claims.
How this list is built
Data sources
This list is built from UK Companies House filings, XBRL accounts data, and semantic analysis of each company's public website. Revenue and headcount figures come from the most recent filed accounts; where the company has not filed, values are estimated using a model trained on filed history and peer benchmarks and are labelled as estimates.
Classification
Rather than relying solely on SIC codes, Firmbase classifies each company semantically: the company's website is crawled, an AI model reads what the company actually sells, and the company is placed into the relevant industry and subsectors. SIC codes are used as one signal but not the only one. This means a company that registered under a generic SIC code but pivoted into (for example) fintech is correctly identified as fintech, not as its original SIC category.
Freshness
The underlying company data is refreshed from Companies House continuously; filings appear in the list within days of submission. The curated list ordering is regenerated when the underlying data moves meaningfully (company count changes by more than 5%, a new company enters the top-ranked segment, or the filed-revenue numbers for the top firms change). You can see the last-updated timestamp near the top of the page.
Also in Sheffield
Related directories
Frequently asked questions
How many machinery companies are there in Sheffield?
What counts as a machinery company in this list?
Which are the largest machinery companies in Sheffield?
What do machinery companies in Sheffield actually do?
How does Sheffield machinery compare internationally?
How is this list built and how fresh is the data?
How big are the typical machinery companies in Sheffield?
Are these mostly new or established machinery companies?
What SIC codes does this use?
What buying signals should I look for?
Push these 224 companies into your pipeline.
Find the right decision-makers, see verified company data, and export your list in seconds.